English  |  正體中文  |  简体中文  |  Items with full text/Total items : 94286/110023 (86%)
Visitors : 21690920      Online Users : 234
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
    •  Adv. Search
    Home ‧ Login ‧ Upload ‧ Help ‧ About ‧ Administer Goto mobile version


    Please use this identifier to cite or link to this item: http://asiair.asia.edu.tw/ir/handle/310904400/91950


    Title: Phase Transformation and Optoelectronic Properties of P-type CuFeO2 Films
    Authors: Lee, Yu-Fu
    Contributors: 光電與通訊學系
    Keywords: CuFeO2
    Date: 2015
    Issue Date: 2015-10-08 01:13:09 (UTC+0)
    Publisher: 亞洲大學
    Abstract: This study is focused on the phase change and optoelectronic properties of CuFeO2 film as p-type semiconductor. In the experiment, the film was prepared using the sol-gel method and annealed in the controlled argon atmosphere. The films were heated at 500℃~850℃, and the low-temperature phase structures of CuO, CuFe2O4, formed at 550~550℃. The increasing temperature facilitated the formation of CuFeO2. By raising the temperature, copper, iron and oxygen atoms were given enough energy to pile up and form the delafossite structure CuFeO2.
    The films annealing at 600℃~800℃ formed a single-phase CuFeO2 structure, and annealing at 850℃ formed a secondary-phase structure. As the annealing temperatures increased from 600℃ to 850℃, CuFeO2 had its RMS values increasing from 3.10 to 10.40 nm gradually. The surface of CuFeO2 showed a fiber-like microstructure. With the increase of the temperature, the fiber-like structure grew and thickened. The single phase CuFeO2 had direct band gaps of 3.70~3.78eV. During the Cu-Fe-O phase transformation, the change in structure determined the transmittance and absorption coefficient of the film. The CuFeO2 film absorbed mainly the photons with wavelengths smaller than 400 nm. In analysis based on the Hall effect measurement, the film exhibited hole conduction and thus was identified as p-type film. The optimum electrical properties were identified in the CuFeO2 film annealed at 700℃. The film had its carrier concentration, Hall coefficient, and resistivity measured as 3.753x 1016 cm-3, 1.665 x 102 cm3/C, and 1.196 ohm-cm, respectively.
    Appears in Collections:[光電與通訊學系] 博碩士論文

    Files in This Item:

    File Description SizeFormat
    index.html0KbHTML276View/Open


    View Licence

    All items in ASIAIR are protected by copyright, with all rights reserved.

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - Feedback