Cubic Spline Interpolation-based Method for Modeling Fluorescent Lamp Dynamic Conductance

ASIA unversity > 資訊學院 > 資訊工程學系 > 會議論文 > Item 310904400/78429

請使用永久網址來引用或連結此文件: http://asiair.asia.edu.tw/ir/handle/310904400/78429

題名:	Cubic Spline Interpolation-based Method for Modeling Fluorescent Lamp Dynamic Conductance
作者:	張文恭;G.W.Chang;劉祐任;Y.J.Liu;陳正一;Chen, Cheng-I
貢獻者:	資訊工程學系
日期:	2008.07
上傳時間:	2013-12-26 10:10:55 (UTC+0)
摘要:	Fluorescent lamps are increasingly used in daily life, in which the gas discharge is the lighting principle. Due to the internal nonlinear characteristics of the lamp tube, harmonic currents are produced when the voltage source is directly connected to the lamp. Furthermore, in order to maintain the stable output of the lighting device, the ballast circuit is used. In practice, accurate fluorescent lamp models for harmonic studies are of importance to understand harmonic pollutions caused by fluorescent lamps. This paper presents a fluorescent lamp dynamic conductance model by using cubic spline interpolation method. To show the usefulness of the proposed model, a 10-W conventional 60Hz fluorescent lamp and a 20-W high-frequency fluorescent lamp are under tested. The laboratory experiments are also performed to verify the accuracy of the proposed model.
關聯:	Proceedings of the 2008 IEEE Power and Energy Society General Meeting
顯示於類別:	[資訊工程學系] 會議論文

文件中的檔案:

檔案	大小	格式	瀏覽次數
index.html	0Kb	HTML	459	檢視/開啟

在ASIAIR中所有的資料項目都受到原著作權保護.