Taper angle of silicon nitride thin film control by laser direct pattern for transistors fabrication

ASIA unversity > 資訊學院 > 資訊工程學系 > 期刊論文 > Item 310904400/25368

請使用永久網址來引用或連結此文件: http://asiair.asia.edu.tw/ir/handle/310904400/25368

題名:	Taper angle of silicon nitride thin film control by laser direct pattern for transistors fabrication
作者:	陳兆南;Chen, Chao-Nan;Huang, Jung-;Huang, Jung-Jie;Wu, Gwo-Mei;Wu, Gwo-Mei;Chien, How-W;Chien, How-Wen
貢獻者:	資訊工程學系
關鍵詞:	Laser Direct Patterning;Silicon Nitride (SiNx);Taper Angle;Thin-Film Transistor (TFT)
日期:	2013-01
上傳時間:	2013-07-11 06:19:06 (UTC+0)
摘要:	Silicon nitride (SiNx), an important material used as a dielectric layer and passivation layer in thin film transistor liquid crystal display (TFT LCD) was patterned by a non-lithographic process. SiNx was deposited by plasma enhanced chemical vapor deposition (PECVD) on glass substrate. Laser photoablation can effectively pattern 5 µm diameter with 200 nm depth hole in SiNx thin films with laser photoablation. The threshold remove fluence is 1350 mJ/cm2 with 1 laser irradiation shot. The contact-hole taper angle as a function of the laser irradiation shot number. The taper angle increased with increasing the laser irradiation shot number. The contact-hole taper angle etched profile was successfully controlled by vary the laser irradiation shot number.
關聯:	Applied Mechanics and Materials, Volumes 284 - 287 : 225-229
顯示於類別:	[資訊工程學系] 期刊論文

文件中的檔案:

沒有與此文件相關的檔案.

在ASIAIR中所有的資料項目都受到原著作權保護.