Manufacturing Process and Practical Examination for a 3D Structural Geocell Made from Recycled PET Fibers

ASIA unversity > 創意設計學院 > 時尚設計學系 > 期刊論文 > Item 310904400/17510

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://asiair.asia.edu.tw/ir/handle/310904400/17510

题名:	Manufacturing Process and Practical Examination for a 3D Structural Geocell Made from Recycled PET Fibers
作者:	林敬文;Lin, Ching-wen
贡献者:	時尚設計學系
关键词:	Geocell;Polyethylene Terephthalate Fiber;Recycle Wasted Materials
日期:	2008-08
上传时间:	2012-11-26 02:33:47 (UTC+0)
摘要:	In the recycle trend, this study used the low-melt polyethylene terephthalate fiber and the recycle wasted materials in producing nonwoven products. These two materials were combined together to form nonwoven products, which have good drain ability and high stress. Then, the high frequency plastic welding machine was used to manufacture the geocell of three dimension nonwoven cubic structure. This study discussed the bonding strength with different bonding length and width. The results show that the uniform of the bonding area resulted from the high frequency plastic welding machine affects the bonding strength. In low-power (tuner point to 2) bonding strength increases while the bonding time increases.
關聯:	Advanced Materials Research, 55-57:421-424.
显示于类别:	[時尚設計學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	240	检视/开启

在ASIAIR中所有的数据项都受到原著作权保护.