Interface Trap Distribution for HCI Reliability Assessment on Bend Gate Structure by 3D TCAD Simulation

ASIA unversity > 管理學院 > 休閒與遊憩管理學系 > 期刊論文 > Item 310904400/17033

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://asiair.asia.edu.tw/ir/handle/310904400/17033

题名:	Interface Trap Distribution for HCI Reliability Assessment on Bend Gate Structure by 3D TCAD Simulation
作者:	高立學;Gau, Li-Shiue
贡献者:	休閒與遊憩管理學系
关键词:	"Bend gate;hot carrier injection;3D TCAD;interface trap. "
日期:	2012-09
上传时间:	2012-11-23 09:19:41 (UTC+0)
摘要:	"This paper demonstrates electrical degradation due to hot carrier injection (HCI) stress for devices with different bend gate structures by three-dimensional (3D) TCAD simulation. The amount and distribution of Si/SiO2 interface trap under different stress conditions were also evaluated by 3D simulation for the first time. Trap-related models were employed to perform accurate physics phenomena during the HCI stress test. Compared with conventional strip gate device, device with bend gate structure suffer from higher interface trap generation after stress, leading to worse on-state resistance (RON) and drain current degradations."
關聯:	International Symposium on the Physical and Failure Amalysis of Integrated Circuits
显示于类别:	[休閒與遊憩管理學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	482	检视/开启

在ASIAIR中所有的数据项都受到原著作权保护.